This is the Plug-and-Play version of Madhacker's BMSOne. It can be used to plug a common off the shelf 4S battery (XT-60) into a 3DR Solo and have battery telemetry as the Solo normally would.

The JB/BMSOne a cooperative collaboration between the creator of the BMSOne universally
known to the Arducopter world as the Madhacker, Mike Lione, Jon Brotherton, and E. D. The primary focus of the JB version is to provide a Plug n Play version of the v1.2 BMSOne that ships pre-configured for the 10,500mAh Li-ion 4S3P 30A Battery (sold separately) in a case to protect it, equipped with the proper connectors to simply plug it into the Solo and battery with a ring strap to secure them in Solo battery bay.

As the JB/BMSOne itself is a PnP device there are some things to consider before making your purchase:

1. YOU MUST CHANGE Arducopter BATT PARAMETERS as the 10,500mAh Li-ion 4S3P 30A pack that the BMSOne is configured to has different output characteristics. Refer to the Parameter Setup tutorial at the end of this document to guide you through the parameter update procedure.
UPDATE: There is a package available in Solex that can make the necessary changes for you. There is also a package to change it back to default settings for Lipo use.

2. It is HIGHLY recommended that you use an aftermarket battery charger to recharge and maintain your batteries. The JB/BMSOne can be used with the OEM Solo charger but will NOT provide balance charge or storage discharge.

Click here for the complete information on requirements and for how-to instructions.

Specs:
Length 64mm
Width 45mm
Height 20mm
Weight: 42g

* One strap for securing the battery is included with purchase.